If you are running the Cisco Prime NCS or Infrastructure Appliance you may see the following error.
The system is running low on diskspace, please refer to online help to perform disk cleanup
I have received this twice now with my Prime Infrastructure (NCS) appliance. Each time I have found that the upgrade or install files were left in the defaultRepo directory along with all of the back up files.
To view these files you should start by looking in the defaultRepo directory. If you place your backup files or your install files some other place, you will have to look there.
This is what mine looked like
GoatPrime# dir disk:/defaultRepo
Directory of disk:/defaultRepo
1730387219 Dec 28 2012 09:43:50 PI-upgrade-bundle-184.108.40.206.tar.gz
1860472744 Feb 20 2013 15:16:09 PI-upgrade-bundle-220.127.116.11.tar.gz
16575516315 Apr 08 2013 01:19:54 backup-20130408-1200.tar.gpg
16875498727 Apr 10 2013 01:27:00 backup-20130410-1200.tar.gpg
16952316499 Apr 12 2013 01:27:06 backup-20130412-1200.tar.gpg
16893108395 Apr 14 2013 01:21:38 backup-20130414-1200.tar.gpg
17115151700 Apr 16 2013 01:26:38 backup-20130416-1200.tar.gpg
0 Dec 28 2012 09:40:40 ncs_patch-18.104.22.168-upgrade-12.tar.gz
11734212 Feb 20 2013 14:35:23 pi_22.214.171.124_update.tar.gz
0 Dec 28 2012 09:41:54 pi_126.96.36.199_upgrade-12.tar.gz
Usage for disk: filesystem
88297095168 bytes total used
35130003456 bytes free
130144694272 bytes available
To clear out files to create more disk space, you need to delete some files that are no longer needed. This is how you delete the files that are no longer needed.
GoatPrime# delete disk:/defaultRepo/PI-upgrade-bundle-188.8.131.52.tar.gz
GoatPrime# delete disk:/defaultRepo/pi_184.108.40.206_update.tar.gz
Repeat this process until you have deleted all of the files that are no longer needed. If you have too many backup files, you should delete some of the older back up files.
Cisco made an attempt to fix this issue a bit easier then what I presented to you. You can always go to the command line and use the ncs cleanup command. This command deletes files from your system. Read all of the prompts carefully so you don’t delete something that you find important.
**Either way, you use to resolve your problem, be careful and don’t delete files you need.
If this does not solve your problem, please let us know what did fix your problem!!!
If you enjoyed this article, please consider sharing it!