Mar 11

IP Phone may have power, but it doesn’t mean it’s connected to the network.

Last week I had one of the phone techs come to my desk and ask me to check the configuration on a switch port. He was setting up an IP Phone for a user at a new desk and the phone powered on but would not register with Call Manager. I checked the switch port, the configuration was correct, but the port was down. To double check the port, I went to the closet with the tech to make sure we were looking at the correct port. After confirming we were looking at the correct port, we headed to the desk.

When I arrived at the desk, the IP Phone had lights illuminated with an error of “Network Not Available”. I suggested that the tech replace the CAT5 jumper at the desk to see if that would resolve the issue, it did. With a new patch cable, the IP Phone powered up and registered with Call Manager.

So why did a new CAT5 patch cable fix the problem?

CAT5 has 4 pair of wires inside of it. 10/100 Ethernet uses pins 1,2,3,6 Ethernet (Data). Power Over Ethernet (PoE) uses pins 4,5,7,8 to power the end device.

In this case, the IP Phone used 100BASE-T, so one or more of pins 1,2,3 or 6 were damaged while 4,5,7 and 8 worked fine.

The troubleshooting steps that the tech went through were correct.
– Phone powered up, but wouldn’t register.
– Switch port was enabled, but didn’t look configured
– Switch port was configured correctly.
– Had to be a cable issue, or a phone issue

By understanding how the basics of PoE worked, I was able to easily identify the best action to troubleshoot the issue. After confirming the configuration was correct, I was able to easily troubleshoot the issue.

Understanding the basic foundations of the technology that you use can really reduce the time it takes to troubleshoot. There are many resources on how PoE works, here is the resource I used to identify what pins are used in the CAT5 cable for PoE. There is a nice chart towards the bottom of the page.

Have you run into this PoE issue on a PoE device?
Do you have any good stories to share about a co-worker not understanding the basics of a technology they are using?

An account is NOT needed to reply, simply click Reply (Replies) or add you comments below and hit submit.

Jul 30

I thought this was a pay phone until I got up close to it.

Recently I traveled to Vancouver BC Canada. While at the airport, I was walking over to hotel shuttle location, I noticed a pay phone. Surprised by seeing a pay phone, I had to go look at it and was surprised to see what I found.

As I got closer, I noticed that the airport had installed a Cisco 7906 IP Phone. This phone was there to call hotels to let them know they had somebody waiting for the shuttle. This phone was outside in the pay phone cabinet, it was also under a canopy.
Cisco 7906 IP Phone as a courtesy phone.

Cisco 7906 IP Phone as a courtesy phone.

I was very surprised that there was nothing else to protect it from the weather. It looks like it has held up pretty good.

What odd places have you seen IP phones?

If you enjoyed this article, please consider sharing it!