Custom Search

To advertise on this site email

What CUCM server the Gateway is registered to?

Site Admin
User avatar
Posts: 372
Joined: Wed Jan 04, 2012 2:36 pm

What CUCM server the Gateway is registered to?

Postby admin » Tue Aug 14, 2012 7:37 am

This example uses MGCP to connect to Cisco Call Manager (CUCM). It also shows two of the three servers down.

ROUTER#show ccm-manager
MGCP Domain Name:
Priority Status Host
Primary Down
First Backup Registered
Second Backup Down

Current active Call Manager:
Backhaul/Redundant link port: 2428
Failover Interval: 30 seconds
Keepalive Interval: 15 seconds
Last keepalive sent: 05:53:35 PDT Aug 13 2012 (elapsed time: 00:00:01)
Last MGCP traffic time: 05:53:35 PDT Aug 13 2012 (elapsed time: 00:00:01)
Last failover time: 12:47:46 PDT Aug 12 2012 from (
Last switchback time: None
Switchback mode: Graceful
MGCP Fallback mode: Enabled/OFF
Last MGCP Fallback start time: None
Last MGCP Fallback end time: None
MGCP Download Tones: Disabled
TFTP retry count to shut Ports: 2

Backhaul Link info:
Link Protocol: TCP
Remote Port Number: 2428
Remote IP Address:
Current Link State: OPEN
Packets recvd: 300
Recv failures: 0
Packets xmitted: 288
Xmit failures: 0
PRI Ports being backhauled:
Slot 0, VIC 1, port 0
Configuration Auto-Download Information
Current version-id: 1312376879-1b23
Last config-downloaded:00:00:00
Current state: Waiting for commands
Configuration Download statistics:
Download Attempted : 1
Download Successful : 1
Download Failed : 0
TFTP Download Failed : 0
Configuration Attempted : 1
Configuration Successful : 1
Configuration Failed(Parsing): 0
Configuration Failed(config) : 0
Last config download command: New Registration
FAX mode: disable
Configuration Error History:
no network-clock-participate wic 1

Return to IP Telephony

Twitter Facebook

Who is online

Users browsing this forum: No registered users and 1 guest