Custom Search

To advertise on this site email advertise@goatnetworking.com

NI-MLX-1Gx48-T show invalide when inserted into a MLXe

Site Admin
User avatar
Posts: 364
Joined: Wed Jan 04, 2012 2:36 pm

NI-MLX-1Gx48-T show invalide when inserted into a MLXe

Postby admin » Fri Apr 20, 2012 11:45 am

If your NI-MLX-1Gx48-T line card does not work right after you install it into your MLX, you may see the following out put when you do a "show module"

show module
S12: NI-MLX-1Gx48-T 48-port 10/100/1000Base-T MRJ21 Module CARD_STATE_INTERACTIVE 0
(S12: Configured as invalid module)

The reason is that the card has 48 ports and the snmp ifindex is not configured for 48 ports by default. You need to run the following system level command and then reboot the chassis.

snmp-server max-ifindex-per-module 64

Your "show module" will now look like this.

show module

S12: NI-MLX-1Gx48-T-A 48-port 10/100/1000Base-T MRJ21 Module CARD_STATE_UP 48

Return to Brocade

Twitter Facebook

Who is online

Users browsing this forum: No registered users and 1 guest