Custom Search

To advertise on this site email advertise@goatnetworking.com

Cannot SNMP MLXe after configuring it

Site Admin
User avatar
Posts: 368
Joined: Wed Jan 04, 2012 2:36 pm

Cannot SNMP MLXe after configuring it

Postby admin » Fri May 11, 2012 8:54 am

The MLX (NetIron) is a little different from the other Brocade switches.

You have to enable SNMP before it will work.

Here is How to configure SNMP on an MLX chassis.

snmp-server --> Enables SNMP, if this is not configured, it will not respond to an SNMP Pole.
snmp-server community <secret> ro <acl name or number> --> Read Only, does not have to have an ACL
snmp-server community <secret> rw <acl name or number> --> Read Write, does not have to have an ACL
snmp-server host <ip address> --> Send Traps to Trap Collector

Return to Brocade

Twitter Facebook

Who is online

Users browsing this forum: No registered users and 1 guest