Custom Search

To advertise on this site email advertise@goatnetworking.com

How to disable or shut down a circuit vlan on a Cisco CSS?

Site Admin
User avatar
Posts: 368
Joined: Wed Jan 04, 2012 2:36 pm

How to disable or shut down a circuit vlan on a Cisco CSS?

Postby admin » Fri Nov 08, 2013 11:53 am

How to disable or shut down a circuit VLAN (SVI or VLAN Interface) on a Cisco CSS?

Example Configuration before you start. It's enabled by default.
Code: Select all
circuit VLAN17
  redundancy

  ip address 10.1.17.1 255.255.255.0


You have to get into the circuit, then you have to go under the IP address, you have to enter the "ip address" command again. After you are under the IP address, then you can issue "no enable".

What you need to type in to disable or shut down the virtual interface

Code: Select all
CSS11503#config t
CSS11503(config)#
CSS11503(config)# circuit VLAN10
CSS11503(config-circuit[VLAN10])# ip address 10.1.17.1 255.255.255.0
CSS11503(config-circuit-ip[VLAN10-10.1.17.1])# no enable



Return to Cisco CSS

Twitter Facebook

Who is online

Users browsing this forum: No registered users and 1 guest