Custom Search

To advertise on this site email advertise@goatnetworking.com

How to optimize Prime Infrastructure GEN2 Appliance?

Site Admin
User avatar
Posts: 372
Joined: Wed Jan 04, 2012 2:36 pm

How to optimize Prime Infrastructure GEN2 Appliance?

Postby admin » Thu Feb 01, 2018 10:40 am

The document doesn't tell you, but you need another network cable into port M on the appliance to access CIMC. This gives you an ILO type of a connection to the appliance.

Improve Performance on Gen2 Appliances
https://www.cisco.com/c/en/us/td/docs/n ... er_00.html

For better performance on the Prime Infrastructure Appliance (Gen 2, UCS based), make sure you configure the virtual drive Write Policy to Write Back Good BBU. To configure the virtual drive Write Policy, follow these steps:
Step 1 Launch the CIMC web interface.
Step 2 Click the Storage tab, click on the SAS Modular Controller name, click the Virtual Drive tab, then click Edit Virtual Drive.
Step 3 Click OK on the dialog box that appears.
Step 4 In the Write Policy field, select Write Back Good BBU, then click Save Changes.

Return to Cisco Prime Infrastructure

Twitter Facebook

Who is online

Users browsing this forum: No registered users and 1 guest