Custom Search

To advertise on this site email advertise@goatnetworking.com

How to perform an SNMPwalk from Cisco Prime (PI) Server?

Site Admin
User avatar
Posts: 367
Joined: Wed Jan 04, 2012 2:36 pm

How to perform an SNMPwalk from Cisco Prime (PI) Server?

Postby admin » Fri Mar 27, 2015 7:34 am

How do I perform an SNMP Walk from a Cisco Prime Infrastructure (PI) appliance?

Log in with your user account to the CLI of the appliance and issue the following command.

snmpwalk <version> -c <community> <IP-of-device>
My example:
snmpwalk -v2c -c ScapeGoat 10.5.5.5

GoatPrimeServer/Goat-admin#
GoatPrimeServer/Goat-admin# snmpwalk -v2c -c ScapeGoat 10.5.5.5
SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.03.05.SE RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 30-Oc
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.1830

Return to Cisco Prime Infrastructure

Twitter Facebook

Who is online

Users browsing this forum: No registered users and 2 guests